X
View Full Product Details
Levers

THE LOAM LEVER GEN 2

$ 1,414.00 Save $ 0.00
/
Clamp Compatibility

If you are unsure about compatibility, reach out to customer service at info@pnwcomponents.com. Additional adapters can be purchased here.

  • Standard 22.2mm Hinge Clamp: Compatible w/ Standard MTB handlebars 
  • SRAM MatchMaker X: Compatible w/ Code, Guide, G2, Level Family - excluding Level, Level T and Guide T versions
  • Shimano I-SPEC II: Compatible w/ XTR M9000, XT M8000, SLX M7000, DEORE M6000
  • Shimano I-Spec EV: Compatible w/ XTR M9100/M9120, XT M8100/M8120, SLX M7100/M7120, Deore M6100/M6120, BLM-4100/BLM-4120


It's been called the yoga mat for your thumb. The Loam Lever's design considers both smooth actuation as well as a superior tactile experience. Simply put, it's fun to press. Plus, we've guaranteed this dropper post lever is nearly indestructible in the harshest of elements.

  • Fully CNC'd aluminum w/ silicone thumb pad 
  • Sealed Cartridge Bearing
  • Stainless Steel Hardware

        Get your gear for your weekend ride. We offer free expedited shipping to the Contiguous U.S on orders of $100 or more.

        Do we ship internationally? Yes, we do! Check out our international shipping page here.

        We've always got your back. If anything goes wrong, we're here to do everything we can to ensure you're taken care of. All PNW products come with a lifetime warranty.

        View Manual

        FEATURES

        • TECHY AF

          Chiseled from a solid block of billet aluminum, the Loam Lever features a fully CNC'd body for a truly artisan product.

        • PARTY MODE

          A grippy redesigned thumb pad makes for smooth and swift dropper post actuation, especially during those "oh sh*t" moments.

        • WEATHERPROOF DETAILING

          Featuring a fully-sealed cartridge bearing and stainless steel hardware, the Loam is built to persevere through the seasons.

        TECHY AF

        Chiseled from a solid block of billet aluminum, the Loam Lever features a fully CNC'd body for a truly artisan product.

        PARTY MODE

        A grippy redesigned thumb pad makes for smooth and swift dropper post actuation, especially during those "oh sh*t" moments.

        WEATHERPROOF DETAILING

        Featuring a fully-sealed cartridge bearing and stainless steel hardware, the Loam is built to persevere through the seasons.

        QUESTIONS?

        Fully CNC'd aluminum body and lever with sealed cartridge bearing and silicone thumb pad (non-replaceable)

        Weight: 36 grams (without clamp or adapter)

        Kit Includes: Lever and clamp of your choice (cable and housing sold separately)

        Compatibility: "Shifter style" lever (compatible with 1x drivetrains - not compatible with front derailleur shifters on the rider’s left side of the handlebar for bikes with front 2x or 3x chainrings)

        Dropper Compatability: Any cable-actuated dropper post (not compatible with RockShox Reverb as they are fully hydraulic posts)

        Cable Routing: Accepts cable routing from either direction

        Clamp Styles:

        Standard 22.2mm hinge clamp (compatible with standard MTB handlebars)

        SRAM MatchMaker X (Code, Guide, G2, Level - excluding Level T versions)

        Shimano I-SPEC II (XTR M9000, XT M8000, SLX M7000, DEORE M6000)

        Shimano I-SPEC EV (XTR M9100/M9120, XT M8100/M8120, SLX M7100/M7120, Deore M6100/M6120)

        The Loam lever runs horizontally, and is machined ergonomically for the left hand side of your bars. As such, it would not work well on the right side of your bars.

        The adhesive we use is something 3M developed for aviation, applied in a sterile area. To avoid voiding the warranty, we don’t suggest attempting to switch the pads out. We know this isn't the fun answer, but we want your Loam Lever to work well!

        While they both run horizontally, the Loam lever is fully CNC'd aluminum (vs Puget's forged aluminum), has a textured silicone thumb pad that color matches our other silicone component colors, 3 mounting positions (vs Puget's 2), additional throw adjustment, and a sealed cartridge bearing for actuation.

        The brand and model of brakes you're running will determine which Loam Lever mount you will need. The standard 22.2mm hinge clamp is for all styles and/or if you want more adjustability, independent of your brake levers. SRAM MatchMaker X is for Code/Guide brakes. Shimano I-SPEC II is for XTR M9000, XT M8000, SLX M7000, DEORE M6000, and Shimano I-SPEC EV is for XTR M9100/M9120, XT M8100/M8120, SLX M7100/M7120, Deore M6100/M6120. If you don’t see your specific brakes listed here, you will want to select the 22.2mm/standard clamp.